PAT-RHC Humidifier

PAT-RHC humidifier is a solution to control your pre-press environment.

PAT-RHC is easily integrated into the pre-press environment to maintain the desired humidity conditions required for optimal equipment performance. PAT-RHC humidifiers provide clean humidification, without introducing airborne contaminants to your environment.

Right Solution to

• Increase material stability with films, ink sheets, paper or substrate
• Eliminate static problems with slip sheet jams and dust adhesion.
• Prevent static discharge on sensitive electronics.

Operating Advantages

PAT-RHC is designed to increase and maintain the humidity level of the entire pre-press room. The electrode steam system produces pure uncontaminated steam with variable output through electronic power control of electrodes.

Precise Control

PAT-RHC units are equipped with wall-mounted Two-year limited warranty humidity sensors in order to obtain modulation control. The modulation system will maintain ± 2% relative humidity (RH) vs. on/off systems which will generally maintain ± 5% RH.

Economy

• Low initial-investment cost
• Produces steam efficiently
• Minimal energy losses due to low hot water drain rates

Installation Flexibility & Simplicity

• PAT-RHC units are wall mounted and do not require any additional floor space.
• Steam distribution in a space is easily accomplished through built-on blower packs.

Easy Maintenance

• Automatic cylinder drain periodically flushes out water borne minerals.
• If unit is not operated for three days, drain automatically empties the steam cylinder.
• When cylinder is filled with residue, it can be easily removed and replaced no cleaning required.

System Features

• Auto self-test at start-up
• Micro-computer electronics
• Potable water operation
• Disposable cylinders
• Low-waste drain water
• Proportional + Integral auto adaptive water control system
• Modulation Control
• Status indicator lamps
• Auto pulse to dislodge debris from drain valve
• Cylinder drain (3 day no-call)
• Tempered drain during normal operation
• Manual output adjustment (20-100%)
• Fill cup with 1" air gap
• Door interlock switch
• High water shut-off
• Key lock doors
• Simple installation
• Built-on blower packs
• UL listed
• CSA certified
• Two-year limited warranty

Technical Data

Capacity*	6 lbs- 30 lbs./hr
Input	KW max 11.4
Voltage**	208-600
Phase	3
Max. External Circuit Protection	40 amps
Rated Amperage	28.7 amps
No. of Cylinders/Control Circuits	1/1
Dimensions Width Depth Height	16.3 in/41.7 cm 11.6 in/29.5 cm 34.4 in/87.4 cm
Net Weight	96 lbs/43.5 kg
Built-on blower packs	Yes

* Output can be field adjusted from 20-100%. Capacities are voltage dependent.

** Units available as follows: 208V, 220V-240V, 440V-480V, and 550V-600V (3 phase)